ALuma Brite

ALUMINUM CLEANER and OXIDATION REMOVER

ALuma Brite is a special formulation of surface cleaners and mild acid designed to restore aluminum to a bright, clean appearance.

  • Removes oxidation to restore a bright, clean aluminum finish
  • Controlled rate of etching helps prevent streaking when working with large aluminum surfaces
  • Easily removes concrete, exhaust soot and road film
  • High foaming / clean rinsing formula

A Breakthrough Lubricant

Dilute ALuma Brite with water. Dilution ratios range from 3:1 to 50:1 depending on the application and the amount of buildup and oxidation to be cleaned.

Apply diluted product with a sprayer, brush or mop. For best results, work relatively small areas at a time and do not allow the surface to dry out during application.

Agitate the area being cleaned with a long handle brush or mop as this activates the product. Allow solution to work on the application surface for 3 to 5 minutes. On larger surfaces, working from bottom to top helps avoid
streaking.

Rinse well with clean water.Avoid contact with porcelain or glass, as ALuma Brite will etch these surfaces. If contact occurs, rinse immediately
with water.

CORROSIONX is backed by a 100% MONEY BACK GUARANTEE
– NO IFs, ANDs OR BUTs!

order ALuma Brite

 

new CorrosionX

ALuma Brite SDS

order ALuma Brite